12V 1 Channel Relay Module
- Brand new and high quality.
- 1-Channel Relay interface board,
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)
0 Reviews Write a review
2 Channel Tilt Sensor Module
- Operating voltage 3.3V-12V
- AÂ fixed bolt hole for easy installation
- Wide voltage LM393 comparator
- Maximum output current: 15mA
- Can work on low voltages
0 Reviews Write a review
2 in 1 Flat and Philips Head Screw Driver for DIY workbench
0 Reviews Write a review
2.4 Inch Touch Screen TFT Display Shield for Arduino UNO Mega
- 2.4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colors
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
0 Reviews Write a review
3.5inch-Touch Screen LCD Raspberry Pi Display
- LCD Type: TFT.
- Touch Screen Type: Resistive Screen.
- Backlight: Yes, LED.
- Resolution (Pixel): 320 x 480.
- Aspect Ratio: 8:5.
- Touch Controller: XPT2046.
0 Reviews Write a review
4PIN NTC Thermistor Temperature Sensor Module
- Using the NTC thermistor sensor, good sensitivity.
- The comparator output signal clean waveform is good, driving ability than 15mA.
- Adjust the temperature distribution bit detection threshold.
- Working voltage 3.3V-5V.
- The output format: Digital switching output (0 and 1).
- With bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
0 Reviews Write a review
5010 750KV High Torque Brushless Motor for Drone
- KV(rpm/v): 750KV
- LiPO Battery: 2-6s Li-Po
- ESC: 20-40A
- Shaft size: 4mm
- Propeller: 14″ – 16″ inch
- Cable length: 40cm
0 Reviews Write a review
5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable
- Resolution: 5 MP
- Interface Type: CSI(Camera Serial Interface)
- Dimensions: 25x23x8 (LxWxH) mm
- Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video
- Fully Compatible with Raspberry Pi 3 and 4 Model B
- Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
0 Reviews Write a review
60 RPM BO Motor–Straight
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 60 RPM
- Rated Torque: 1 Kgcm
0 Reviews Write a review
A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
- Motor KV: 1000
- Current Capacity: 12A/ 60S
- LiPO Batteries: 2S-3S
- Max. Efficiency Current: 4-10A
- Shaft Diameter: 3.17 mm
0 Reviews Write a review
AI-BO8 ADVANCE KIT
Ultra Sonic Sensor 1
Joystick 1
PIR Sensor 1
Buzzer (S) 1
Single Seven Segment Display 1
Gas Sensor 1
DHT 11 1
Touch Sensor 1
ESP32 1
HC05 1
GSM 1
IRFZ44N Mosfet 1
LDR Module 1
Sound Detection Module 1
SD Card Module 1
Light Sensor 1
GPS Module 1
Soind Module 1
Color Sensor 1
Rain Drop Sensor 1
RTC Module 1
IR Sensor 1
Soil Moisture Sensor 1
Buzzer (B) 1
Car Set 1
2 Channel Relay 1
4*4 Keypad 1
DC Pump 1
Ultra Sonic Sensor Stand 1
12V Battery 1
Jumpers Wire (M-M) 40
Jumpers Wire (M-F) 40
Jumpers Wire (F-F) 40
9V Battery Connector 1
Small Breadboard 1
Big Breadboard 1
RFID Tag 1
Motor Driver Sheild 1
Solar Panel 1
Magnet 1
IR remote 1
0 Reviews Write a review
AiBo8 starter 3D Printer
I3 style printer
Linear rod and linear bearing bearing mechanism
Touch Screen 32 bit motherBoard
Made in india robust power supply and all aluminum design
0 Reviews Write a review
Categories: General
All Purpose Hot Melt Glue Sticks for Glue Gun – 5pcs
- Diameter: 11mm
- Length: 190mm
0 Reviews Write a review
Anti-Static Anti-Skid ESD Gloves
0 Reviews Write a review
Basic Electronics Kit
In this kit, you will get a variety of electronic components that can be used to construct or enhance your knowledge of many types of electronic components. Out of the box, the kit has products Resisters, Battery holders, Breadboard, Battery connectors, Jumper wires.
0 Reviews Write a review
BLIX DISCOVERING MOTIONS-ROBOTICS FOR KIDS
₹3,399.00
Blix Discovering Motions, one of the finest robotics for kids, makes it easier for children to understand the basics of Physics. Introduce robotics training for kids and let them learn complex scientific concepts with the Blix Discovering Motions.
0 Reviews Write a review
₹3,399.00
Categories: General
Cable tie
This is Nylon Cable Zip Ties 200 MM WHITE (100PCS), 200mm long black nylon cable ties in 3.6mm width, ideal for general cable bundling etc. Bag of 100 cable ties. This cable tie is a great way to keep your cables neatly organized, untangled and out of the way.
These reusable ties can be used over and over again because they are made from tough, flexible nylon. A ribbed inside surface makes them self-locking and secure, and just a quick pinch of the fingers releases the tie.
0 Reviews Write a review
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
0 Reviews Write a review
DC 5V 4020 Cooling Fan for Jetson Nano
- Noiseless Performance
- Very low Current consumption
- Easy to install and connect.
- Size: 40mm x 20mm
- Mounting Hole Size: M3 (3mm)
0 Reviews Write a review
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
0 Reviews Write a review