12V 1 Channel Relay Module
- Brand new and high quality.
- 1-Channel Relay interface board,
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)
0 Reviews Write a review
2 Channel Tilt Sensor Module
- Operating voltage 3.3V-12V
- AÂ fixed bolt hole for easy installation
- Wide voltage LM393 comparator
- Maximum output current: 15mA
- Can work on low voltages
0 Reviews Write a review
4PIN NTC Thermistor Temperature Sensor Module
- Using the NTC thermistor sensor, good sensitivity.
- The comparator output signal clean waveform is good, driving ability than 15mA.
- Adjust the temperature distribution bit detection threshold.
- Working voltage 3.3V-5V.
- The output format: Digital switching output (0 and 1).
- With bolt holes for easy installation.
- Using a wide voltage LM393 comparator.
0 Reviews Write a review
Categories: Sensor Modules
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
- Output Power: 5mW
- Working Voltage: 5V DC
- Working temperature: -10 ℃~＋40 ℃
- Housing material: Copper
- Working life: more than 2000 hours
- Spot mode: Dot Facula (continuous output)
- Laser wavelength: 650nm red-colored.
- Operating current: <40mA
- Power lead length: 120mm
0 Reviews Write a review
Categories: Sensor Modules
Bluetooth
HC-05 6 Pin Wireless Serial Bluetooth Module is a Bluetooth module for use with any microcontroller. It uses the UART protocol to make it easy to send and receive data wirelessly.
The HC-05 Wireless Bluetooth Module without Baseplate is a slave only device. Â This means that it can connect to most phones and computers with Bluetooth but it cannot connect to another slave-only device such as keyboards and other HC-06 modules. Â To connect with other slave devices a master module would be necessary such as the HC-05 version which can do both master and slave.
0 Reviews Write a review
Categories: Sensor Modules
BMP180 Digital Barometric Pressure Sensor Module
- I2C Compatible
- Pressure range: 300 to 1100hPa
- High relative accuracy of ±0.12hPa
- Can work on low voltages
0 Reviews Write a review
Categories: Sensor Modules
Cable for Arduino UNO/MEGA (USB A to B)
- Fully compatible with the PC.
- Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions.
- Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
0 Reviews Write a review
Categories: Sensor Modules
Capacitive touch switch module
The Digital Sensor TTP223B Module Capacitive Touch Switch is based on a touch-sensing IC (TTP223B) capacitive touch switch module. Allows you to remove the worry of conventional push-type keys.
Digital Capacitive Touch Switch Module is based on TTP223B. Normally, it outputs low and keeps at low power state. When a touch is sensed on the circular marked region, it outputs high and switches to the quick response state. When not being touched for 12 seconds, it switches to low power state again.
If the module is mounted in the surfaces of non-metallic materials such as plastic, glass, acrylic, you can make the keys hidden in the walls and desks.
0 Reviews Write a review
Categories: Sensor Modules
Colour Recognition Sensor
The TCS3200 Color Recognition Sensor Module for MCU Arduino uses a high-quality light sensor allowing you to sense any color through a combination of Red, Green, and Blue. The module provides all of the pins of the TCS3200 on convenient 0.1″ headers – ideal for use with PCBs, breadboard or stripboard.
0 Reviews Write a review
Categories: Sensor Modules
DHT11 Digital Relative Humidity and Temperature Sensor Module
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Working voltage 3.3V-5V
- Humidity measurement range: 20%-95% (0-50 degrees range)
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement range: 0 degrees -50 degrees
- Temperature measurement accuracy: ±2.0degree.
0 Reviews Write a review
Categories: Sensor Modules
Digital LDR Module
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
0 Reviews Write a review
ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
0 Reviews Write a review
ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
- Flash LED off: 180mA @ 5V.
- Flash LED on to maximum brightness: 310mA @ 5V.
- Deep-sleep: 6mA @ 5V min.
- Modem-sleep: 20mA @ 5V min.
- Light-sleep: 6.7mA @ 5V min.
0 Reviews Write a review
Categories: Sensor Modules
Flame Sensor Module
- Comparator chip LM393 makes module readings stable.
- Operating voltage 3.3V-5V.
- Fast Response Time
- Sensitivity adjustable
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
- Detection range: up to 100 cm.
- Adjustable detection range.
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
0 Reviews Write a review
Categories: Sensor Modules
FS1000A 433mHz Tx & Rx RF Radio Module
- Wide input supply (2.5 V to 12V)
- Easy to integrate (V+, GND, and Data)
- The device in deep sleep mode when Data pin is grounded
- Very small dimension.
0 Reviews Write a review
GY-31 TCS3200 Color Sensor Module
- High-Resolution Conversion of Light Intensity to Frequency
- Programmable Color and Full-Scale Output Frequency
- Power Down Feature
- Stable Temperature Coefficient
- Can be directly interfaced with a Microcontroller
0 Reviews Write a review
Hall Sensor
- Power: 2.3V ~ 5.3V
- Dimension: 27.0mm * 15.5mm
- Mounting holes size: 2.0mm
- Color: Blue
0 Reviews Write a review
Categories: Sensor Modules
Infrared Tracking Module Tracing Sensor
- Input voltage: 3.0 V – 5.5 V
- Output form: digital output (high and low level)
- Detection distance: 0 – 4 cm (black and white line sensors)
- 0 – 5 cm (adjustable distance detection)
0 Reviews Write a review
Categories: Sensor Modules
IR Sensor Module
- Detection distance: 2 ~ 30cm
- Detection angle: 35 °
- Comparator chip: LM393
- 3mm screw holes for easy mounting
0 Reviews Write a review
Categories: Sensor Modules
L293D Motor Driver Module
- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
- Peak Current (A): 600 mA
- No. of Channels: 1
0 Reviews Write a review